What Is a PA Door?
A PA door is a personal access door. It is the hinged walk-in door on a shed or garage, so you can get in and out without opening the roller door. This one is a steel PA door made in Victoria by Taurean Door Systems, part of Stramit. The leaf is a single skin metal clad door, 0.55mm BlueScope steel over riveted stiffeners, 37mm thick. It suits sheds, garages, workshops, barns and self storage units.
Pre-Hung PA Door Kit or Leaf Only
Pre-hung kit
The complete shed PA door kit. The leaf arrives hung in its own steel jamb with the hinges and lock fitted, ready to fix into your opening. The jamb is 35 x 35 x 1.6mm heavy duty Duragal SHS, galvanised and powder coated in Shale Grey to match the internal steel of most sheds. You get three 100 x 65 x 2mm colour matched hinges, a heavy duty knob entrance lockset, and a chrome cabin hook to hold the door open in the wind. The pre-hung door carries a certified wind rating of N4/C1 in domestic applications, when installed more than 1200mm from the building edge.
Leaf only
The door slab on its own. No jamb, hinges or lock. Choose this if you are replacing a damaged leaf in an existing frame, or you want to supply your own hardware.
Sizes
| Door leaf, 820 wide | 2040mm high x 820mm wide x 37mm thick |
| Door leaf, 920 wide | 2040mm high x 920mm wide x 37mm thick |
| Pre-hung jamb, 820 door | 910mm wide x 2130mm high |
| Pre-hung jamb, 920 door | 1010mm wide x 2130mm high |
| Swing | Outward standard, opens a full 180 degrees |
| Wind rating | N4/C1 domestic, pre-hung, over 1200mm from the building edge |
| Manufacturer | Taurean Door Systems |
| Warranty | 12 Months |
Other sizes are available on request. Call us on 1300 456 356 before ordering.
Colours and Finish
Choose Zincalume, or any colour from the Colorbond Classic and Contemporary range. If your shed is Zincalume, order Zincalume. If your walls are Colorbond, pick the same colour as your cladding. Select “To Be Confirmed” if you are not sure. We call to confirm every order before it goes to the factory.
See the full Colorbond colour range
Installing a PA Door in a Shed
The pre-hung kit is fixed through its jamb to the door framing in your shed wall. Frame the opening to suit the jamb size above, stand the unit in the opening, check it is plumb, then fix it off. Flashings to trim the door into your wall cladding are not included. A leaf only door needs a jamb, three hinges and a lock before it can be fitted. Not sure how to frame the opening? Call us on 1300 456 356 before you order.
Ordering Your PA Door
Select your door width, pre-hung kit or leaf only, and your finish. Once you place your order we will call to confirm the details before anything goes to the factory. Because each door is made to the size and colour you choose, it cannot be returned for change of mind once production starts. This does not affect your rights under the Australian Consumer Law if a door arrives damaged, faulty or not as ordered.
PA Door Questions
What does PA door stand for?
Personal access door. It is the trade term for the walk-in door on a shed, as opposed to the roller door.
What is the standard PA door size?
2040mm high x 820mm wide is the most common. 920mm is the wider option. Both are 37mm thick.
Can I add a PA door to an existing shed?
Yes. You cut the cladding and frame an opening to suit the jamb size, then fix the pre-hung kit in. It does not have to go in when the shed is built.
Does the pre-hung door come with a lock?
Yes. A heavy duty knob entrance lockset and three hinges are fitted at the factory. The leaf only door has no lock.
Which way does the door swing?
Outward is standard and the door opens a full 180 degrees. Call us before ordering if you need it to swing inward.
Free Delivery Australia Wide
For some remote regions in Australia, additional charges may apply or you may need to arrange your own freight from the nearest depot. We will tell you before proceeding with the transaction. For the majority of locations, we can deliver to your door.
























Reviews
There are no reviews yet.