4600mm High Light Industrial Roller Door

Price range: $2,919.00 through $5,874.05

“Commando” Commercial Roller Door – 4600mm High

Includes all hardware required for installation.
Free delivery Australia Wide.

We will call to confirm your exact required size once order has been placed.
Any questions, please call us on 1300 456 356.

Instructions are included with every order.

Click here for remote instructions.
Click here for opener manuals.

We are based in Albury, NSW. Below are expected lead times (excluding custom garage / shed doors). We offer express or next day express in the checkout.

TAS - 4-7 Days
VIC - 3-5 Days
NSW - 3-5 Days
ACT - 3-5 Days
QLD - 6-8 Days
SA - 4-6 Days
NT - 7-12 Days
WA - 7-12 Days

Shipping Policy

For compliance, a button battery warning appears on all product pages. The battery type is noted in the description when relevant.

WARNING! This product may contain a button/coin cell battery. To prevent possible SERIOUS INJURY or DEATH:

Keep new and used batteries out of reach of children at all times.
Do not use the product if the battery compartment is damaged or doesn’t close securely.
Dispose of used batteries immediately and safely - even flat batteries can cause harm.
Do not ingest the battery. Chemical burn hazard.
Act fast if you suspect a battery has been swallowed or inserted - severe or fatal injuries can occur within 2 hours.
Seek immediate medical attention or call:
– Australia: Poisons Information Centre on 13 11 26
– New Zealand: National Poisons Centre on 0800 764 766

  • Order before 1pm, we'll despatch it the same day
  • 60 day return policy (including change of mind)
  • Instructions included with your order
Description

The Commando Collection

With a roller door from the Taurean® COMMANDO COLLECTION you’re getting a door that has been designed and developed through decades of industry knowledge that operates smoothly with ideal balance. Every Commando door is made from quality COLORBOND® steel, in a wide range of contemporary colours and available in a full range of sizes up to 5100mm high and 5100mm wide, which suits small commercial factories, sheds or other buildings.

The balance comes from a springing system engineered to provide years of use and optimal life. This is especially important in high cycle commercial and industrial applications. More information can be found in Taurean’s commercial roller door brochure.

Measuring Your Garage or Shed Roller Door

You don’t need to call your local garage door repairman or salesperson to measure your roller door. This can be easily done by anyone, including yourself. Before we begin, there are a few terms we want to make sure are clear:

Opening
This is the hole in your wall the garage door will cover and protect. A roller door is typically installed on the inside of your opening, within the garage or shed itself.

Sideroom
This is the space between the edge of your opening, and the garage or shed wall.

Headroom
This is the space between the edge of your opening and the ceiling (or roof).

1. Measure the width of your opening. In this example, our opening will be 2500mm, or 2.5m wide. If your opening is under 3430mm wide, add another 50mm to the width. If your width is over 3431mm wide, add 100mm to the width. This is so your garage door has enough room to install either side of your opening.
2. Measure the height of the opening. In this example, our opening is a standard 2200mm, or 2.2m high.
3. Ensure you have enough headroom. For a standard 2200mm high opening, you need at least 440mm of headroom. You will require more headroom for higher roller doors.

For more information, please head over to our roller door installation page.

Ordering Your Shed or Factory Roller Door

Once you have your garage door width, select the door width bracket you fall into. For example, if your door is 2500mm wide, you would select the 1851-2550 width selection. You can also select from a range of roller door openers, as well as the entire Colorbond Colour range.

Once you place your order, we will call you to confirm the exact door size and colour you require. We also offer Windlock and Windstrong roller doors for high wind areas.

Custom-Made Commercial Roller Doors

Wholesale Garage Doors offers factory-direct garage and shed doors manufactured by Taurean Door Systems, delivered directly to your door. The Taurean range of Commercial and Industrial roller doors are manufactured in Sydney, Melbourne and Brisbane, with delivery linehauls to the NT, SA and WA. Taurean Door Systems have been manufacturing residential and commercial roller doors for over 30 years, with a reputation built upon Quality and Reliability

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “4600mm High Light Industrial Roller Door”

Need Help Finding Your Product?

Send us a photo! We'll be able to tell you what you need and send you a link to purchase.

Text us

Same Day Despatch

Order before 1pm and we'll get your order on the road that day!

Shipping Policy

Commercial Roller Doors American Barn
4600mm High Light Industrial Roller Door
Price range: $2,919.00 through $5,874.05 Select options