Holden Cruze, Trax, Barina Replacement Car Key Shell Case AOHO-CK04
$18.00
In stock, despatched today if ordered before 1pmMade to order, ships in 2 to 3 weeksOut of stock, call 1300 456 356 for an ETA
Auto Openers AOHO-CK04 Includes
1x “AOHO-CK04” Replacement Holden Car Key Case
1X HU100 Key Blade (Blank / Uncut)
Installation instructions in description
Chevrolet branded. No circuit board included.
Will it fit?
This is a replacement part. Check the compatibility list before you order, it names every opener and remote this suits.
Made to your opening
Every door is manufactured to the height and width you give us. Measure the opening itself, not the old door. We call to confirm the numbers before anything is cut.
- Free shipping, same day despatch before 1pm
- Free delivery, made to order and shipped in 2 to 3 weeks
- 60 day returns, including change of mind
- Made to your size, so change of mind returns do not apply
- Instructions in the box, and online by brand
Shipping and lead times
We are in Albury, NSW. Shipping is free on every order, and express or next-day express can be chosen at checkout.
Held in stock. Order before 1pm on a business day and it goes out the same day with tracking.
Made to your opening. Doors are manufactured after you order and ship in two to three weeks. We call to confirm your measurements before anything is cut, then let you know the despatch date.
| NSW, ACT, VIC | 3 to 5 days |
| SA | 4 to 6 days |
| TAS | 4 to 7 days |
| QLD | 6 to 8 days |
| WA, NT | 7 to 12 days |
Returns and warranty
Every order has a 60 day return option, including change of mind.
This door is cut to the size you give us, so it cannot be returned for change of mind. Once your measurements are confirmed and the door goes into production, the order cannot be cancelled or refunded. Please check your opening carefully before ordering, and call us on 1300 456 356 if you are unsure how to measure.
This does not affect your rights under the Australian Consumer Law. If a door arrives damaged, faulty, or not made to the measurements you supplied, contact us and we will repair, replace or refund it.
Warranty runs from 12 months and varies by product. Auto Openers motors carry five years, and that warranty covers a DIY installation, which most brands will not do. This product's term is in the specifications below.
Battery safety
This product may contain a button or coin cell battery. Keep new and used batteries away from children. Do not use it if the battery compartment is damaged or will not close. Dispose of used batteries straight away; flat ones can still cause harm. If a battery is swallowed or inserted, act immediately, severe injury can occur within 2 hours. Poisons Information Centre 13 11 26 (Australia), National Poisons Centre 0800 764 766 (New Zealand).
Not sure it's the right one? Send a photo of your old remote or opener to 0419 198 148 or call 1300 456 356. The team in Albury fit these for a living.
Details and compatibility
Description
Holden Car Key Case Replacement Specifications
| Manufacturer | Auto Openers |
| Made To Replace | Holden |
| Model Number | AOHO-CK04 |
| Compatible Models | RPCKHO-MS09 RS-GM-019 |
| Keyblade Model | HU100 |
| Case Dimensions | 6.4 x 3.5 x 1.8 (cm) |
| Case Weight | 41g |
| Genuine / Aftermarket | Aftermarket |
Holden Car Key Case Replacement Compatibility
This Auto Openers AOHO-CK04 will replace your old and worn out Holden or Chevrolet car key case and shell. Below are some of the Holden car models that use this car remote. However, please ensure that your car remote and buttons look the same as pictured.
Holden Car Key Models
- Barina (TM) 2011 – 2014
- Cruze (JG) 2009 – 2010
- Cruze (JH) 2010 – 2014
- Trax 2013 – 2014
- Holden VF Commodore
Chevrolet Car Key Models
- Camaro 2010 – 2013
- Cruze 2011 – 2013
- Equinox 2010 – 2013
- Malibu 2013
- Spark 2013
- Sonic 2012-2012
- Volt 2011-2013
If you are not sure if this will suit, please send us a photo of your car remote so we check for you. Click here for our contact us page.
How Do I Replace My Holden Key Case?
Replacing the buttons on your Holden car key remote is very simple and can be done by anyone. You only need a small, flathead screwdriver (or similar tool) and 1 minute.
- Press the button to open the key blade on your old car key, which will reveal a small hole in the side of the car key case.’
- Insert a screwdriver into that hole and pry open the case, but be careful! There will be a spring that is under some tension and can fall out.
- Remove the internal circuit board and key blade. Please check your circuit board to ensure that the transponder is present on the circuit board. This is a small, rectangual chip present on the pointed part of the circuit board. If it is not present, check the top right portion of the keycase. It will need to be moved over.
- Insert the circuit board, transponder and transponder cover into the new car key case.
- Click and screw together the new case, then test to ensure that everything is working fine.
Please note, sometimes the original key blade does not suit our replacement case. If this occurs, you will need to have the key cut by an automotive technician or locksmith.
If you are reasonably handy, we do have some steps below submitted by a client on how to adjust your new repalcement car key case.
- Take a 0.8 mm pin punch and use it to remove the pin from both the new and old car key blades. Keep the pins.
- Note that the pin is inserted into a slot in the blade, which is slightly misaligned in the old blade compared to where it should be in the new one.
- Use a needle file to carefully elongate the slot in the correct direction, checking the alignment with the old blade in the new swivel fixture until you can see through the pin hole.
- Once the slot is elongated correctly, use the original blade in the new swivel assembly to drive the pin back in, and then reassemble the key.
What Is Not Included?
This Auto Openers AOHO-CK04 is a replacement case only. This product will include a key case shell, blank key blade and rubber buttons.
The AOHO-CK04 does not include the car key internals, such as the circuit board or transponder. This product is not a functioning car key remote.
Wholesale Garage Doors distributes automotive keys, remotes and casings which are compatible with the vehicles produced by other manufacturers, and which are substitutes for automotive keys, remotes and casings produced by those manufacturers. Except where a product is expressly stated to be a “genuine” product, our products are not produced by, and are not authorised, endorsed or approved by these other manufacturers.
Additional information
| Weight | 0.041 kg |
|---|---|
| Dimensions | 6.4 × 3.5 × 1.8 cm |
Alexandra England –
Great seller. Great item. works perfectly
Naomi Reed –
Very happy with item and service. Thanks.
Ruqayyah French –
Great purchase, great savings! Will purchase from you in the future! Very happy, Thank you!
Yasir Harris –
top service